GRAVIMETRIC (CONTINUOUS FEEDER) CONTROLS Schenck AccuRate offers a comprehensive range of gravimetric controls from basic, all the way to the industry's most revolutionary, modular electronic control systems, which integrate easily into your plant's existing architecture to offer high-end gravimetric control. INTECONT PLUS FOR FEEDING SYSTEMS Compact measuring, control and supervisory system for continuous feeding applications. Offers enhanced operating reliability through diagnostics and self-testing functions. Application specific functionality, integrated display and control panel, high operating convenience, and automatic calibration programs. |
|
|
|
|
| DISOCONT® "DS-SERIES" INTEGRATED CONTROLLERS DISOCONT® "DS-SERIES" Controllers are standard pre-configured gravimetric control packages designed specifically for applications involving a single Loss-in-Weight (continuous) feeder, Loss-of-Weight (batching) feeder, Weighfeeder or Mass Flow Meter. "DS-SERIES" Controllers combine a DISOCONT® System Module with AC or DC motor controls, analog and digital I/O and feed device specific software, in a Nema 4X type enclosure. A complete "Mechatronic" or wall-mount gravimetric controller is formed using this "DS-SERIES" DISOCONT® Control System. |
|
|
|
|
| DISOCONT® "DS-SERIES" INTEGRATED CONTROLLERS - REMOTE MOUNT DISOCONT® "DS-SERIES" Controllers are standard pre-configured gravimetric control packages designed specifically for applications involving a single Loss-in-Weight (continuous) feeder, Loss-of-Weight (batching) feeder, Weighfeeder or Mass Flow Meter. "DS-SERIES" Controllers combine a DISOCONT® System Module with AC or DC motor controls, analog and digital I/O and feed device specific software, in a Nema 4X type enclosure. A complete "Mechatronic" or wall-mount gravimetric controller is formed using this "DS-SERIES" DISOCONT® Control System. |
 |
|
|
|
| DISOCONT® "DC-SERIES" CONTROL COMPONENTS "Flexibility" best describes the DISOCONT® "DC-SERIES" controls. DISOCONT®'s CPU, I/O, operator station and fieldbus communication links such as Profibus and DeviceNet, have been offered as "modules" which can be selected to form a very application specific control system. No unnecessary cost. No unnecessary complexity. Using the "DC-SERIES" DISOCONT® Control Modules, you can specifically decide what level of control and control responsibility you prefer to have. |
 |
|
|
|
|
OP1 OPERATOR INTERFACE Specifically designed as a single feeder operator interface for the DISOCONT® control, the OP1 provides users with operation, calibration, trending, and basic diagnostics in one easy to use system. A graphical touch screen display contains the latest in HMI technology and multi-level password protection allows a supervisor to select/protect read or write parameters for operator access only.
|
 |
|
| |
| PROFIBUS-DP FIELDBUS INTERFACE MODULE (#DC-5) The Profibus-DP fieldbus interface permits a plant PC or PLC (programmable logic controller) to directly control a DISOCONT® based control system via the Profibus-DP communication protocol. The module itself mounts inside of the DISOCONT® "DC-1" System Module, allowing over 96 control functions, 800 status bits and 90 process feedback values to be accessed. Control parameters can also be manipulated through this interface. Click here for configuration files between Schenck AccuRate controls and the Profibus fieldbus |
 |
|
|
|
| DEVICENET FIELDBUS INTERFACE MODULE (#DC-6) DeviceNet is a fieldbus interface which permits a plant PC or PLC (programmable logic controller) to directly control the DISOCONT® based control system via the DeviceNet communication protocol. The module mounts inside the DISOCONT® "DC-1" System Module, allowing over 96 control functions, 800 status bits and 90 process feedback values to be accessed. Control parameters can also be manipulated through this interface.  Click here for configuration files between Schenck AccuRate controls and the DeviceNet fieldbus |
 |
|
|
|
| MODBUS FIELDBUS INTERFACE MODULE (#DC-7) Modbus is a fieldbus interface that permits a plant PC or PLC (programmable logic controller) to directly control a DISOCONT®-based control system via the Modbus communication protocol. The module itself mounts inside of the DISOCONT® "DC-1" System Module, allowing over 96 control functions, 800 status bits and 90 process feedback values to be accessed. Control parameters can also be manipulated through this interface. |
|
|
|
|
| MODBUS ETHERNET INTERFACE MODULE (#DC-8) A fieldbus interface that permits plant PC or PLC (programmable logic controller) to directly control a DISOCONT®-based control system. The Modbus communication protocol is transmitted over a standard ethernet cabling system. The Modbus ethernet module attaches directly to any DISOCONT® "DC-1" System Module. |
 |
|
|
|
| EASYSERVE TOOLS (SOFTWARE) (#DC-9) A Windows 95, 98, 2000, NT or XP compatible tool kit used for configuration and diagnostics. Using "EasyServe", set-up, service diagnostics, and menu customization is done using the familiar "point and click" approach common with personal computers today. |
|
|
|
|
| ETHERNET/IP MODULE (#DC-10) A fieldbus interface that permits a plant PC or PLC to directly control a DISOCONT®-based control system. The Ethernet/IP communication protocol is transmitted over a standard Ethernet cabling system. The Ethernet/IP module attaches directly to any DISOCONT® "DC-1" System Module. |
 |
|
|
|
| I/O EXPANSION MODULE (#DC-11 ) An integrated I/O expansion module that mounts directly in the fieldbus slot of any DISOCONT® "DC-1" System Module. |
 |
|
|
|
OTHER SCHENCK ACCURATE CONTROLS:
OTHER SCHENCK ACCURATE PRODUCTS:
|
|
Adobe Acrobat Reader required to view the above PDF files.
